GIGABYTE M30 1TB SSD in Bangladesh
With the high-quality controller and flash, GIGABYTE M30 SSD can reach up to 3500 MB/sec sequential read, and up to 3000 MB/s sequential writes. Moreover, it comes with the DDR3L DRAM, SLC Cache, and advanced LDPC error correction to enhance the performance. It’s an ideal choice for gamers, PC enthusiasts, and content creators.
Breaking Limitations
GIGABYTE M30 SSD delivers outstanding performance: up to 3500 MB/sec sequential read, and up to 3000 MB/s sequential write. Equipped with a robust combination of controller and 3D NAND, M30 is up to 6 times faster than SATA III Solid State Drives and reach the limit of PCIe Gen3x4.
Ultra Durable, 2 oz copper PCB Design
Under a high-stress workload, most SSD controllers can peak over 70°C. In this situation, the drives will start slowing down to avert itself from failing. The hotter your SSD runs, the quicker it wears out the flash inside of the drive. GIGABYTE M30 SSD applied with 2 oz copper PCB design, which helps dissipate heat and prevent throttling.
Why is keeping A SSD at lower temperatures so important?
Higher working temperature may cause data loss. The degradation factor of data loss could be a hundred times higher. With 2 oz coppetr PCB, GIGABYTE M30 SSD can operate at lower working temperatures to improve data storage reliability. Furthermore, SSDs can running at extreme performance longer.
| Storage | |
| Capacity |
1TB
|
| Internal or External |
Internal
|
| Sequential R/W |
Read speed Up to 3500 MB/s
Write speed Up to 3000 MB/s |
| Flash Type |
3D TLC NAND Flash
|
| Ports | |
| Interface Type |
PCIe 3.0x4, NVMe 1.3
|
| Physical Specification | |
| Form Factor |
M.2 2280
|
| Operating Temperature |
0°C to 70°C
|
| Dimension |
22 x 2.3 x 80 mm
|
| Storage Temperature |
-40°C to 85°C
|
| Technical Info | |
| MTBF |
2 million hours
|
| Warranty Information | |
| Warranty |
03 years Warranty.
|
